Rule 900 GPH Low Profile Manual/Automatic Bilge Pu is available from Mercury Bay Marine in our Boat Accessories range for marine, boating and outdoor use in New Zealand.
Key features
• Rotating discharge body for easy installation. Valves designed to prevent backflow.Features: ManualThe Rule LP900D Bilge Pump is a low profile pump with 900 gallons per hour capacityDesigned for tight spaces, the height of the pump is only 2-1/4"It features a threaded discharge nozzle to which you can attach either the included straight or 90° fittingMultiple ports are available for this pumpAll ports are included3/4" Straight3/4" Right angle1" and 1-1/8"It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of waterThe entire discharge body swivels up to 180° for ease of installationThe hose can also swivel 360° for better routingThe 900D model requires a float and/or panel switch (Sold Separately)Features: AutomaticThe Rule LP900S Automatic Bilge Pump is a low profile pump with 900 gallons per hour capacityDesigned for tight spaces, the height of the pump is only 2-1/4"It features a threaded discharge nozzle to which you can attach either the included straight or 90° fittingMultiple ports are available for this pumpAll ports are included3/4" Straight3/4" Right angle1" and 1-1/8"It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of waterThe entire discharge body swivels up to 180° for ease of installationThe hose can also swivel 360° for better routingThe LoPro LP900S has (2) Automated settings, enabling the pump to turn on when the water reaches either 2" or 1.3"High or Low Water Sensing Mode:The pump starts when water reaches a 2" levelBy turning the motor cartridge upside down, the sensor is set at 1.3"Electronic Automatic Mode:The pump automatically turns on every 2.5 minutes to check for water, and if it's detected the pump stays on until the water is gone